Utilization of Carbide Welding Waste as an Alternative Cement Mixture for Concrete Compressive Strength

Authors

  • Ahmad Nukhbah Aufarillah Yudharta University Pasuruan, Indonesia
  • Januar Sasongko Yudharta University Pasuruan, Indonesia

DOI:

https://doi.org/10.61453/joit.v2025no26

Keywords:

Concrete, Carbide Welding Waste, Compressive Strength, Cement Mixture

Abstract

This research was conducted to investigate the utilization of carbide welding waste as a cement mixture on the compressive strength of concrete with a target quality of Fc 25 MPa. The test specimens were cylindrical, with a diameter of 15 cm and a height of 30 cm. Concrete mixtures incorporated carbide welding waste as a partial cement substitute, with variations of 5%, 7%, and 10%, compared to a conventional control mixture based on cement volume. A total of 16 cylindrical specimens were prepared. Compressive strength tests were conducted at 7 and 28 days. The designed concrete strength was Fc 25 MPa. The results showed that the use of carbide welding waste in concrete mixtures led to a decrease in compressive strength at 7 days compared to concrete without waste. However, at 28 days, compressive strength increased significantly, especially at certain percentages. At the optimal percentage, carbide welding waste was proven to improve the compressive strength compared to normal concrete, thus demonstrating its potential as an effective cement mixture

References

Anggraeni, D., & Tarangga, A. (2020). Analysis of the Utilization of Hazardous Waste Materials, Carbide and Fly Ash in Concrete Mixtures on Compressive Strength, Split Tensile Strength and Modulus of Elasticity. Jurnal Portal Sipil, 9(1), 43–52. https://ojs.ustj.ac.id/sipil/issue/view/90

Asrullah, Diawarman, Anggrainy, R., & Afif, K. (2021). Analysis of Concrete Compressive Strength Fc ’ 25 MPa With the Addition of Rock Ash and Main Mortar Cement Type 400. Jurnal Teknik Sipil UNPAL, 11(2), 60–66. https://doi.org/10.36546/tekniksipil.v11i2.515

Erdiansyah Putra, B., & Israjunna. (2023). The Effect of Adding Carbide Waste on the Mechanical Properties of Concrete in a Mixture of 1 Cement : 2 Sand : 0 – 15% Carbide Waste. SainTekA, 4(2), 22–28. https://doi.org/10.58406/sainteka.v4i2.1239

Kahiriah, W. P. S. S. D. L. B. L. K. T. K. T. D. K. Lentur., Abdullah Nasution, M., & Sinta Y Sitanggang, E. (2022). The Effect of Partial Replacement of Cement with Carbide Welding Hazardous Waste on Compressive Strength and Flexural Strength. Jurnal Ilmiah Teknik Sipil Agregat, 2(1), 35–43. https://doi.org/10.51510/agregat.v2i1.563

Pratama, E. D., Rochmah, N., & Firmansyah, M. (2025). Analysis of the Addition of Carbide Waste as a Cement Substitute on the Compressive Strength of Mortar. JUTIN : Jurnal Teknik Industri Terintegrasi, 8(3), 2357–2362. https://doi.org/10.31004/jutin.v8i3.45594

Putra, B. E., & Asfarina, S. (2024). Utilization of Carbide Waste in Lightweight Concrete Mixtures as Additives. Agregat, 9(1), 1022–1027. https://doi.org/10.30651/ag.v9i1.22244

Somalinggi, L. J., Phengkarsa, F., Febriani, L., Program, M., Teknik, S., Kristen, U., & Paulus, I. (2020). The Effect of Carbide Waste / Calcium Carbide as a Cement Substitute in Concrete. Paulus Civil Engineering Journal, 2(4), 289–297. http://ir.unimas.my/id/eprint/21414

Syahriadi, Purnamasari, E., & Gazali, A. (2021). The Effect of Utilizing Carbide Welding Waste as a Cement Reduction Material on the Compressive Strength Quality of Mortar with Different Proportion Variations. Revision 2. https://eprints.uniska-bjm.ac.id/8636/

Wahyudi, I., Taufik, & Mulyani, R. (2022). The Effect of Adding Carbide Waste as a Cement Substitute on the Compressive Strength of Concrete. Kumpulan Executive Summary Tugas Akhir Wisudawan Teknik Sipil Ke-78, 2(1), 9–10. https://ejurnal.bunghatta.ac.id/index.php/JFTSP/article/view/21941

Wardana, N. D., Alex, V., Wicaksono, A., Malik, D., & Putra, A. (2025). DEVELOPMENT OF MORTAR MATERIAL TECHNOLOGY IN GEOPOLYMER CONCRETE. Prosiding Seminar Nasional Teknik Sipil 2025, 208–217. https://proceedings.ums.ac.id/sipil/article/view/5607

Winarno, E., & Juara, A. (2021). Analysis of carbide waste substitution and the addition of waste cloth fibers on the compressive strength of concrete. Teras, 11(3), 1–14. https://ojs.unsiq.ac.id/index.php/teras/article/view/3104

Downloads

Published

2025-12-18

How to Cite

Aufarillah, A. N., & Sasongko, J. (2025). Utilization of Carbide Welding Waste as an Alternative Cement Mixture for Concrete Compressive Strength. Journal of Innovation and Technology, 2025(2). https://doi.org/10.61453/joit.v2025no26