A Study on the Effect of Varying Pressure and Distance on Material Hardening in INTI Plasma Focus Machine

Authors

  • Jingjing Wang School of Business Administration, Anhui University of Finance & Economics, Bengbu, China
  • Haolin Wang Institute of Finance and Public Management, Anhui University of Finance & Economics, Bengbu, China
  • Xiangqian Yang Institute of Finance and Public Management, Anhui University of Finance & Economics, Bengbu, China
  • Yajie Hao Business School, Anhui University of Finance & Economics, Bengbu, China
  • Guoxin Ma China Cooperative Research Institute, Anhui University of Finance & Economics, Bengbu, China

Keywords:

Rural pension, China, Cooperative, Elderly association

Abstract

Material hardening is a topic of much interest. In this paper, material hardening on AISI 1020 low
carbon steel was done using INTI plasma focus (INTI PF) machine. It was found that the best
distance for optimum hardening was to place the sample material 4 cm from the anode at a pressure
of 1 Torr when the plasma machine is operating at 12 kV as it improves the hardening by 97.8%.
Computation with the Lee codes produce plots of ion beam energy versus pressure and number of
ions versus pressure. Thus we are able to correlate the optimum hardness of the treated sample
surface to the interaction of optimum beam energy and number of ions.

Downloads

Published

2020-09-28

How to Cite

Wang, J., Wang, H., Yang, X., Hao, Y., & Ma, G. (2020). A Study on the Effect of Varying Pressure and Distance on Material Hardening in INTI Plasma Focus Machine. INTI Journal, 2020. Retrieved from https://iuojs.intimal.edu.my/index.php/intijournal/article/view/191

Issue

Vol. 2020: INTI Journal

Section

Articles

License

Copyright (c) 2020 INTI Journal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.